[Panel]


Table of Contents

[Panel]
2015.[10].[5], [10]:[10][am]
2015.[10].[6], [10]:[30][am]
2015.[10].[7], [11]:[30][am]
2015.[10].[14], [11]:[30][am]
Name:Tianhe Lou
Date and Time:

2015.[10].[5], [10]:[10][am]

Location: lab
Subject: make the gesso and apply glue on the panel



Name: Tianhe Lou
Date and Time:

2015.[10].[6], [10]:[30][am]

Location: lab
Subject: apply the gesso ground

Every time when apply the grounds, wet the back of the panel with a hoghair brush first and sand lightly.

10: 35 first layer
10: 50 second layer
11: 50 third layer
2: 15 fourth layer


Name: Tianhe Lou
Date and Time:

2015.[10].[7], [11]:[30][am]

Location: lab
Subject: apply the gesso ground

11: 35 fifth layer
13:50 sixth layer
15:10 seventh layer
17:15 eighth layer

Note:
1. the more layers on, the more time to wait for the panel drying
2. once there are air bubbles when applying the gesso, try to remove them before getting dried; otherwise there will be little holes on the panel. And it would be really difficult to get rid of them in later procedures. In fact, it's useless to make later layers cover these holes. The only way for remedy is to sand heavily. In this sense, it is necessary to reconsider the adverb "lightly" in the original text. Even if there are no air bubbles, after the last layer we have to sand heavily for a long time to make the panel "milk/silver like".


Name: Tianhe Lou
Date and Time:

2015.[10].[14], [11]:[30][am]

Location: lab
Subject: try pigments on the panel

11: 25 first layer [horizontal]
11: 35 second layer [vertical]
11: 55 third layer
12:15 fourth layer

Note:
1. To prepare the pigment, sand and wet the particles thoroughly.

ASPECTS TO KEEP IN MIND WHEN MAKING FIELD NOTES